Comparison Chart
Table of Contents
History of QEnergySpa BEFE
History of QEnergySpa BEFE Hydrotherapy
Table of Contents
Model 3006 Model 3024 B.E.F.E. Array Array 2000
Model 2100/2500 Model 3100 Model 4100/4105
Q Orb Orb II q26, q36, q46 q47 Current Models ..coming soon q6000
There are several previous models of the QEnergySpa® and water modules that are no longer available for purchase. However, if you already have one of these models, we do have parts available (Rings and Track). CLICK HERE to order.
Creator of the QEnergySpa BEFE Technology: Terry Skrinjar 2004 Scottsdale, AZ
The history of this technology, known as the QEnergySpa began in Australia, early 1996 when Mr. Terry Skrinjar (pictured here) and friends contemplated and debated potential technologies based upon Quantum Reality Field Science (QRFS), a term coined by Mr. Skrinjar. With a strong interest in alternative health, the question was posed: “Could QRFS be used to create a device that would have the potential to “cure just about anything”? With this challenge, Mr. Skrinjar proceeded to draw up design specifications of the world’s very first unit “created to re-balance and amplify the Bio-Energetic Signature of the body” – Terry Skrinjar 1997. The intention was to use water as a medium, due to its unique properties.
Experimental Array Prototype
The picture here represents the very first ‘experimental’ prototype, affectionately referred to as the ‘Junk Yard Dog’ which Mr. Skrinjar assembled using items collected from a farm junkyard.
Gizmo Prototype Array History
The initial design of the Gizmo prototype was constructed, consisting of a series of parallel rings to act as an antenna or Array. Scaled up a prototype (Gizmo). A company was formed in order to develop and market this innovative product. Upon completion, the Gizmo was trialed, with a suitable power supply, by a number of family and friends associated with QtheExperience. With numerous benefits reported the commercialization of this device began.
The Gizmo was later called the “Array” of the Bio-Electric Field Enhancement unit (B.E.F.E. unit), which became the “Q2 Water Energy System”, followed by the “Q2 EnergySpa” and is now marketed as the “QEnergySpa”.
QEnergySpa/BEFE History of First Array and Array 2000
The Array 2000 (water module) was QtheExperience’s second mainstream Array. It was shipped with the B.E.F.E. power supply model numbers: 3006, 3024B, 3024D, and 2100s. During the following two years, QtheExperience researched and developed both the original Array and the power source to drive it. Several design changes were made, pictured to the left, to make the unit more user-friendly, aesthetic and to allow for commercial production. However, the core construct and composition of the rings in the Array remained virtually unchanged. CLICK HERE for the step-by-step illustration on how to change the Rings and Track.
It was also during this time that Mr. Ivan Serensen joined the company as a Director and Electrical Engineer. Redesigning and building a new power source properly based on the Quantum Resonance principles to power the Array in order to further improve the technology. He is still our engineer today.
Vintage 1999: (Bio-Electric Field Enhancer) BEFE MODEL #3006
The B.E.F.E. (Bio-Electric Field Enhancement) Unit model 3006 was one of the first power supplies released to the public by Q Tech Laboratories. It was released in January 1999.
Vintage 2001: BEFE MODEL #3024
The B.E.F.E. (Bio-Electric Field Enhancement) Unit model 3024 was the second mainstream power supply released to the public by QtheExperience. The first revision was designated 3024B, followed later by a second revision designated 3024D. The 3024B was released in September of 2001. The BEFE-3024 The Q2 Water Energy System was upgraded to include a built-in attenuator. The design is more compact which also allows for the use of less water making it more environmentally friendly.
BEFE has approval from the Australian Therapeutic Goods Administration
Although the BEFE has received official approval from the Australian Therapeutic Goods Administration (comparable to the US FDA) for marketing as a therapeutic spa/medical device, Skrinjar points out that it is not actually a medical device and does not diagnose or treat any disease. Rather, it is a sophisticated spa system that energizes water, which is used as a conductive medium. The body itself does the healing, after absorbing this bio-energy as needed.
2003: New Q Orb
In 1999 QtheExperience became International and as such had to comply with the International Electrical Safety Standards required that the rings and components within the Array had to be fully enclosed, so that the user can not make contact with the rings. This was the impetus and birth of the Orb as shown here. The enhanced design of the NEW ORB vs. the Old Array – allows for less interference from the tracks connecting the various rings to the power source. This means that the ORB can establish a more effective quality of field, improved clarity, and bio-energy enhancement between you and the water. Today there are thousands of these units throughout the world and the number is growing exponentially as the word spreads about the benefits this technology provides for its users.
March 2003 History
… this NEW System, known as the Q2 Water Energy Spa System. The Model 3100 replaced the BEFE 3024D. New models included the Personal Use Model 2100 and the Professional Model 4100. Also, the new ORB II – pictured below, replaced the ARRAY.
Model 2100/2500 – Model 3100 – Professional Model 4100/4105
2003 -New Orb
This enhanced design and assembly of the orb include a (blue bottom shell).
The enhanced design of the NEW ORB includes a latch for the cable to attach
more firmly. This means that the ORB can establish a more effective quality
of the field, improved clarity, and bio-energy enhancement between you and the water.
June 2004 – Series II Orb History
The enhanced design of the NEW ORB II, made with clear acrylic allows for less interference.
This means that the Orb can establish a more effective quality of the field, resulting in improved clarity and bio-energy enhancement. The latch is now part of the bottom shell, making the cable easier to attach, for ease of use and functionality.
January 2013 – Models q26, q36, and q46 History
The Q Energy Spa continues proudly to remain the world leader in noninvasive Bio-Energy Hydro-therapy technology, in Australia by QBiotechnologies, Pty. Ltd.
Feb 2014: Model q47 History
This release supersedes the previous q46; including a significant improvement in stability and power clarity. The q47 boosts the overall bio-energy efficiency and is also available as an upgrade
for all users of the models 4100, 4105, and the later q46.
April 2023: New Model: q6000
This is the best model the world has to offer. Nothing else comes close. The q6000 supersedes the models 4100, 4105, q46, and q47.
This model will be the ultimate in Anti-Aging, faster recovery, and overall health. Re-Energize & Re-Vitalize your body for wellness you will soon discover to be better than you have felt in years. In fact, potentially 5 to 10 years younger. Currently taking PRE-ORDERS NOW: Order New Model: q6000
Current: 2020
Our current models include q26 and q37. Soon to be available q6000.
We have new q26, q37 in stock, and shipping right now.
______________________________________________________
Today there are thousands of these units throughout the world and the number is growing exponentially as the word spreads about the benefits this technology provides for its users. Nothing works better and performs like the Original QEnergySpa. For that reason, insist on it ONLY. See all of our QEnergySpa products. Go here.
Q2Spa.com | Genuine QEnergySpa Parts | QEnergySpa Footbath | Orb Ring and Track Sets |
Orbs and Cables | Array Cables | Fuses | Display all QEnergySpa Products Look here.
You may always contact us with any questions or part requests.
We are here to help you set up your session. Nothing looks and performs like a genuine QEnergySpa Footbath. For that reason, Pros insist on them. Do you need spare parts for your QEnergySpa Footbath? Does your orb or array have a broken or missing part also? Then you have found the right place. Q2Spa.com Online Since 2002
Genuine QEnergySpa Parts| Orbs and Cables | Fuses | Array Parts | How-To-Q
First of all, we have QEnergySpa Parts in stock.
Solid, untreated, unvarnished copper tubs – which have the potential 10% to 30% increase in efficiency! The most asked-for parts include cables, fuses, orbs, and ring and track sets. Service Parts for QEnergySpa, orbs, arrays | User Guides and Manuals. Even more, see our newest QEnergySpa Pro q6000 online, Go here.
The statements on this site have not been evaluated by the FDA.
These products are not intended to treat, cure, or prevent any disease.
Water colors From Sessions
Water Colors, Dirt, and Smells
Table of Contents
Water colors seem to be a common subject with footbaths. The coloration and precipitation of the water colors after every session is primarily due to the following. A combination of the degradation of the rings within the Orb (water module) and the impurities present in the water source. However, if these were the only two factors affecting coloration and these factors remained constant, one would expect the same coloration outcomes after every session. This is not the case. Several other factors also play a role.
The main factors that affect water colors are:
- Water Source
- Conductive Agent
- The person in the session
- The temperature of the water
- Weather and other Environmental Factors
- Orb
- Power Supply
- Container used
- Please Note: A session without any person in it may also cause discoloration and precipitation in the water.
In the industrialized world of today, “living” energetically charged water is a rarity. In our drinking water supply systems, water is exposed to the detrimental energetic effects of straight unnatural water pipes, high main pressures, and chemical treatments. Water is not allowed to move in its naturally winding way thereby causing loss of life force. Negative energetic imprints from chemicals, such as fertilizers, pesticides, and sterilizers remain in the water, even after the physical removal of such substances. (Dr. Wolfgang Ludwig & Prof. Jacques Benveniste)
Factors affecting water colors.
1. Water Source:
Under ideal water conditions, no discoloration and precipitation occur. Note that water sources are ever-changing. For example, the conductivity and atmospheric electrical activity alter during certain times of the year and may fluctuate during periods of rain.
Tap water (treated) – Generally has good conductivity and is readily available. Discoloration and precipitation depend on the treatment by your local water treatment plant and other local environmental factors.
Well or groundwater – Generally very conductive, may require diluting by adding either tank or distilled water. Different sources of bore water affect the colors and precipitation differently. Environmental factors play a large role.
Tank or distilled water – Generally very little conductivity. Often requires a small amount of ‘Conductive Agent’ for the unit to operate (the only instance that anything should be added to the water).
During the session, some of the minerals, chemicals, and other impurities suspended in the water, along with the degradation of the rings, congeal to form large molecules, evident in more precipitation and discoloration.
2. Conductive agent (salt):
Under normal circumstances, no ‘Conductive Agent’ is required for the QEnergySpa to operate. In the rare event that the conductivity of the water is too low, a ‘Conductive Agent’ may be added. Adding ‘Conductive Agent’ results in increased precipitation and coloration. Rock salt or sea salt are the only two current ‘Conductive Agents’ we recommend. At the rate of ¼ – ½ teaspoon per 3 gallons of water (1g per gallon).
Please note: NEVER use Himalayan Pink Salt.
Most pink Himalayan salt actually comes from a Pakistani government-owned mine that’s south of the famed mountains. The Khewra Salt Mine is now a tourist attraction, but its history is violent. During British colonial rule, the British forced locals to work in slave-like conditions in the mine. Even today, wages are low. Pakistani newspaper The Dawn reported in 2018 that a miner makes 350 Pakistani rupees, or about $2.50, for every ton of salt excavated.
3. Person in session:
We all have unique bio-energy fields or signatures (which are constantly changing due to various exposures) much like fingerprints. Even identical twins with seemingly the same health status have different bio-energetic fields. These different bio-energy fields interact differently with the water, resulting in diverse colors and solids.
One of the most common misconceptions is that people using these devices are detoxifying through the soles of their feet and that the resulting color is a direct clinical interpretation indicative of specific ailments. This is a medical ‘Detox hoax’. No interpretation or diagnosis should ever be applied to any color and or precipitation. A visual inspection of the water in the first few minutes during the session will clearly show the precipitation arising from the ORB and NOT from around your feet.
Detoxification takes place through the body’s natural channels and is but one aspect of regaining better health.
The QEnergySpa is capable of much more. A test of 13 people was conducted using the same water on the same day resulting in different colors and sediments. The lightest water colors (top left of picture) came from the heaviest smoker in the room, clearly showing that no interpretation can be applied to the water colors and the toxins are not drawn out of the soles of the feet.
4. Temperature of the water:
Changing the temperature changes the conductivity of the water. It also affects the lattice structure of the water. The temperature of the water helps determine the release rate of toxins from the water. Hot water will release solids at a faster rate than cold water, provided there are materials in the water that can be released. Even though heating the water damages the lattice structure, the critical temperature for the ‘damage’ to occur is 87.1 degrees Celsius, which is well inside the critical temperature for sessions. That said, please use the water temperature that suits you to leave your feet in for 35 minutes. Personally, I prefer hot water.
As a result of the vast misinformation from competitive products in the marketplace regarding water colors and detoxification, Q the Experience experimented with an earlier model power supply and Array to demonstrate the differences that can be achieved by changing water temperature. Two trials were conducted using 33 and 45 degrees Celsius water. In this experiment water temperature was the only variable, all other factors remained constant. Note: this water was treated by itself, no human contact was made during the session.
reticulated tap water temperatures at 33ºC. | reticulated tap water temperatures at 45ºC. | |
|---|---|---|
|
| |
| Picture 1a: Before the beginning. Note the number of lights on the power supply in the background. | Picture 1b: Before the beginning. | |
 |  | |
| Picture 2a: After 10 Minutes | Picture 2b: After 10 Minutes Notice that the color and the amount of sedimentation are already more than that shown in the Picture 2a. | |
 |
| |
| Picture 3a: After 20 Minutes | Picture 3b: After 20 Minutes Notice that the sediment on top and the color of the water are darker. | |
 |
| |
| Picture 4a: After 35 Minutes | Picture 4b: After 35 Minutes. Slightly darker again. | |
This is proof that “Temperature” does in fact impact the outcome in the water. | ||
5. Weather and other environmental factors:
Water itself is not only very sensitive to the weather but also to the entire environment. The electrical activity including the conductivity can fluctuate during extreme weather conditions. Proximity to natural and man-made exposures including (but not limited to) geological formations, mineral deposits, chemicals/toxins, electrical influences such as power lines, microwaves, electrical storms, solar flares, lunar cycle, radio frequencies, and radiations present in the immediate environment at the time of the session will influence water discoloration and precipitation. The graph on the left indicates the electrical activity of water recorded over a twelve (12) hour period. As you can see it is not static but is in fact very active. Water is completely interactive with the environment.
6. The Orb (water module):
With every use, the rings encased within the Orb degrade. The extent of degradation or corrosion in the water is determined by such factors as the water source and the presence of the conductive agent.
7. Power supply:
The components, as well as the type of power supply used for this technology, although minimal, will affect the coloration and precipitation of the water after the session. For example, switch-mode power supplies found in other brands are less suited for bio-energetic use, creating considerably higher levels of precipitation and coloration. The QEnergySpa utilizes a transformer-based technology that is designed and manufactured to specific safety and Quantum Reality Field Science (QRFS) standards.
8. Container used:
The energetic properties or signature of the bath container also impact the coloration and precipitation of the water. We recommend you use an (in order of preference) pure quartz crystal bowl, a raw untreated copper bowl, glass, ceramic or plastic bowl (for ease of use, a disposable plastic bag or liner may be used). You can also use your bathtub. The only stipulation is that the bowl cannot be made of or contains Aluminum or uncoated fiberglass. Size and shape matter little, as long as the orb is fully submerged and you can fit a part of your body in the water.
Looking for deeper knowledge? Read the QUANTUM SCIENCE Page here.