Posted on

Charged Water Drinking

Charged Water Drinking. What are the benefits?

Glass of QEnergySpa BEFE Charged Water

QEnergySpa® can be used to treat drinking water. In fact, enhancing the electric field of your drinking water and drinking it, will have a positive internal effect.

Why should I drink energized drinking water?

By drinking charged water, in this readily absorbable format, you are directly energizing your internal system. Many organs can utilize the bio-electrical energy directly. The kidney, for example, functions by utilizing the process of electrolysis to separate both excess nutrients and toxins from your blood. This function can be improved with the delivery of extra energy.

So how does Charged Water work?

Internal Human OrgansYour body requires energy to function. Your main source of energy is derived from your metabolism or energy produced by the breakdown of ingested matter. Metabolism starts when you eat or drink. The food and drink ultimately end up in your stomach where it is then broken down by the acid in the stomach into a liquid. Anything left solid that can’t be broken down passes through the system. The nutrient-enriched liquids are collected from the intestines and go directly into the blood. The blood then circulates the nutrients throughout the entire body, to every cell. Because water can pass directly into the bloodstream via the stomach, the charge it carries is distributed internally also.

How to charge Drinking Water

The process for charging drinking water is simple. All you need is a 2 – 3 liter glass jug and your normal QEnergySpa® items.

Step 1

Place a full bottle (glass or shop bought) of your preferred drinking water into another container of water large enough to hold the Orb and the bottle of water.

Step 2

Ensuring the Orb is completely submerged, turn on the QEnergySpa® and charge the water for 15 minutes. Do not have a person in session as well.

Step 3

Turn off the QEnergySpa® remove the bottle of drinking water, rinse it off under a running tap, this water will hold its energetic charge for
approximately 90 hours. Dispose of after 90 hours.

Step 4

The energized water can only be consumed (one good-sized glassful) once per day. Avoid sipping, drink your glass all at once.

When should I drink energized water?

Some people may prefer to drink it in the morning and some may prefer the evening. To find out which best suits you, try the mornings first then switch to the evening to see whether it makes a difference to you. You should not drink water more than once a day.

Can you drink the charged water from the QEnergySpa, BEFE on the same day as a session?

Yes, one standard glass, 8-16 ounces but it is our recommendation to drink one standard glass of the charged water on the days you do not have a treatment. Do not to drink the water directly in contact with the plates we recommend to place a glass container with the water you wish to charge within the charging water and only drink the water from the glass container which will remain clear.

How much Charged Water should I drink?

For the correct daily amount that you should drink, please refer to the bodyweight tables below. The procedure for charging drinking water can be used for all living creatures including plants (see associated plant section). The amount of water an animal or person should drink relates to their body weight. Drinking the water should be done as per instructions only once a day. The following tables show the maximum amount of water you can drink per day. Once you have charged the water, it should not be mixed with any other water. i.e. drink it purely with no additives.

Water Table

Note: This table represents the maximum amount of charged water you may drink in one day.
For the larger volumes that are not easily consumed in one go, try to drink over a 30 minute period or less.

_________________________________________

The QEnergySpa is the latest in home based systems developed by Q-Tech Laboratories as an aid for relaxation and well-being. It was created to realign, balance, and enhance the bioenergetic levels in the water that is then used by the cells of all living things. The Experience increases vitality, clarity, and an overall sense of well being. By using the QEnergySpa regularly, you (and your family) can increase your energy levels whenever needed.

Healthy or not; the benefits of the Q Energy Spa can be an advantage to all.

Posted on

Cleaning Your orb and cable

Cleaning Your BEFE QEnergySpa Orb and Cable

Descale Magic CLR Cleaning SolutionTo maintain your system in optimum condition, it is important to clean it, preferably after every use, between different people. If only you – every 3-4 uses. Keeping it clean reduces fuses blowing and ring/track maintenance. We choose to use DeScale Magic Cleaner or CLR.

 

Cleaning the Q Energy Spa Orb

Outlined below are the factors that need to be considered when cleaning the Orb. Both in the clinic and in your home. We also recommend some “tried and tested” cleaning solutions that are currently available on the market.


Maintaining your Orb

Pictured here are the series of orbs created over the years. All orbs use the same cleaning options.

Initial Orb 2003Q2Orb with Blue Bottom Shell BEFE ORB II
When cleaning your Orb, four (4) factors need to be considered:

  1. Hygiene – Avoid cross-contamination from one person to the next.
  2. Presentation – A dirty Orb is not a good look in professional practice or clinic.
  3. Energy Transfer – Remove all energetic properties of the previous person in session, before embarking on a new session with a different individual.
  4. Life of Orb – The longer you soak your Orb in any solution, the shorter the life of the components of the Orb. So soak at a minimum.

Maintaining your Cable

Worn Cables
Examples: When to Replace Worn Cables

Regularly inspect the Cable, too! The second cable connector (Mohawk) from the left in the image shown, may require replacement. You should consider ordering a new cable at this stage. Don’t be tempted to add more ‘conductive agents’ at this stage in order to get the required conductivity. If the connections are not adequate, the unit will not function correctly and will decrease the life of the Orb considerably.

HOW TO MAXIMIZE THE LIFESPAN OF: Your Orb, Cable, and Power Supply

Regularly, inspect the connections on the inside of the cable connector (the Mohawk) for oxidation and wear. Replace the Cable when visibly corroded and pitted. The more corroded the stainless steel cable connectors are, the softer they become, and hence the more likely they are to drop back and rest on the plastic. Careful here: this can be remedied by inserting a small flat head screwdriver or handle of a teaspoon behind the plate and while holding the point where the connector is attached, easing it forward.

Regularly inspect the Rings and Track within the orb.

Worn rings and tracks
Example: Worn Rings and Tracks

Replace the Rings and Track when visibly pitted and or worn or when the edges or thickness have been visibly affected. Note that the more corroded the Rings and Tracks become, the less effective they are. In the picture above, the second ring and track are at the stage at which we recommend that they should be replaced. The rings and track may last 10-100 uses. Check the rings and tracks when you clean the orb regularly.

 

_________________________________________________________
To keep your QEnergySpa® Orb clean, there are a few different
methods that may be employed depending on your situation.

In the Clinic

    Following a session in a clinic or practice setting, it is recommended that you:

  • Rinse your Orb in clean warm water.
  • Place your Orb in a cleaning solution for a few minutes (this will ensure removal of any deposit of sediment or mineral and energetic properties). It is strongly advised that you wear protective gloves when cleaning the Orb using the recommended cleaning solutions.
  • Rinse Orb vigorously in a container of warm water, to wash off the residual cleaning solution and place under fresh running warm water for 30 seconds (your Orb is ready for the next session).
  • At the end of the day, you may like to completely disassemble the Orb and leave it in solution for 5 – 15 minutes. This is a good time to inspect all the components and replace the Rings and Tracks if needed. If the Orb shell and Center Module are still dirty after the 15 minutes of soaking in solution; these parts can be soaked for longer.

Note: The field created during the session slowly alters the components. Over time the plastic becomes increasingly more brittle. Pulling the Orb apart regularly ensures that the components don’t adhere, making it difficult to pull apart.

Cleaning Solution: Descale Magic

Descale MagicDescale Magic is a biodegradable, non-toxic cleaning solution suitable to use with the QEnergySpa, BEFE Units Orb, or Array. This solution usually will keep for one to two months for repeated use in this time frame. This product is also safe for use with septic and greywater making it a good choice for the environment as well.

Cleaning Solution: CLR

CLR Cleaning Solution

CLR (most supermarkets) This solution should be mixed one part (CLR) to two parts water. This mixture can be stored in a re-sealable container and used many times before needing to be replaced. The solution when first mixed can be relatively aggressive and it is advised that you do not leave your Orb in this solution for longer than the recommended time period (15-30 minutes) as it may degrade Orb components prematurely. Once the solution has been used a few times, this aggressive nature diminishes.

WARNING: Be aware that all of the above-mentioned cleaning solutions may damage the cupboard, stainless steel, floor, and benchtop surfaces, in their undiluted and diluted states. Hence, it is always a good idea to clean up spills as soon as they occur. We accept no liability for any damage or injury that may occur by the use of these solvents.

Lemon Juice: A Natural Cleaning Solution

Real Lemon Bottle

Salt Shaker

Lemon Juicer

  • Rinse your Orb in clean warm water.
  • Prepare your natural cleaning solution by adding 2 tbs. of salt to 1 liter of lemon juice.
  • Place your Orb in the cleaning solution for 5 minutes between sessions (this will ensure removal of any deposit of sediment or mineral and energetic properties).
  • Rinse Orb vigorously in a container of warm water, to wash off the residual cleaning solution and place under fresh running warm water for 30 seconds (your Orb is ready for the next session).

At the end of the day, you may like to pull the Orb apart and leave it in solution for 10 – 15 minutes. This is a good time to inspect all the components and replace the Rings & Tracks if needed. If the Orb shell and Center Module are still dirty after the 15 minutes of soaking in solution; these parts can be soaked for longer.

In Your Home

For home users, the cleaning of the ORB may be carried out as described above. However, to lengthen the life of the ORB components, it is advisable to clean your Orb at a minimum.

Example: every time you replace your positive rings and track set. This will ensure that you do not get an excessive build-up of minerals and other deposits that may interfere with the proper function of your QEnergySpa®. If however, more than one person is using the Orb, it is recommended that a solution is used between the different users to ensure that no energetic component from the previous person interferes with the session of the next person.

Maintenance

Plate and Track set replacement.
Water conditions play a large role in the erosion of the positive plates and track. For this reason, it is very difficult to put a time frame on when to replace. The easiest way to determine when to change the positive plates and track is to take a close inspection.
Place your finger on the positive plates and track, if it bends, replace it as the metal has deteriorated. When replacing plates or taking the ORB apart please read the manual carefully & check the ORB quick reference guide.

PLEASE NOTE:
Array Plate Change Video

When reassembling the Array (pictured) or the Orb, always ensure the top positive ring is sitting on and touching the Positive track. The cable connector hood is fitted flush with the orb.

 

Transportation of the QEnergySpa

Please take care of the Energy Spa. Whenever the need arises to ship the system; either use the original Styrofoam box inside another bag or box. Sharp objects including other cardboard boxes can easily damage the Styrofoam box. QTE is not responsible for any damage that occurs through owner negligence. Protect the front of the Energy Spa from knocks and scratches. The Attenuator switch on the models 2100, 3024, 3100, and 2500 is prone to damage from strong impacts. Place bubble wrap or foam over the switch whilst in the carry bag.

__________________________________

Nothing works better and performs like the Original QEnergySpa. For that reason, insist on it ONLY.

See all of our QEnergySpa products. Go here.

Do you need spare parts for your QEnergySpa?

Q2Spa.com Online Since 2002 | Genuine QEnergySpa Parts
Original QEnergySpa | QEnergySpa, BEFE Consumables | Support

Does your QEnergySpa have a broken or missing part also? Then you have found the right place. First of all, we have all parts to fit ALL BEFE and QEnergySpa models. In addition, the most asked for parts include replacement rings and tracks, cables, orb parts, orb shells, and orb buttons. We also offer all services including warranty and repair. Also stocking solid, untreated, unvarnished copper tubs – which has the potential 10% to 30% increase in efficiency, Potassium-Citrate, which may raise the conductivity level of your water, and more. Q2Spa.com also offers Certified Used Models to meet almost every budget. You may see all the Q2Spa.com used models, Go here.

Q2Spa.com | Genuine QEnergySpa Parts | QEnergySpa Footbath

Orb Ring and Track Sets | Orbs and Cables | Array Cables

Fuses | QEnergySpa, BEFE Consumables | Support

Lastly, what is new at Q2Spa.com? Check out our Blog, look here.

Q2Spa| QEnergySpa Parts | Schedule a Session | Veggie Trials | BEFE Parts

The statements on this site have not been evaluated by the FDA. These products are not intended to treat, diagnose, cure, or prevent any disease.

Posted on

Bio-Electric Field Enhancement BEFE

The Bio-Electric Field Enhancement, BEFE

Bio-Electric Field Enhancement (BEFE) Technology

Bio-Electric Field Enhancement - Original BEFE TechnologyThe Bio-Electric Field Enhancement Unit (QEnergySpa, BEFE) was presented at the Global Sciences Congress in Boulder, Colorado in August 1999. At the time, it was and still is, the original and the ONLY home-based therapies developed by Q-Tech Laboratories (Q the Experience, Future Life Science) in Toowoomba, Queensland, Australia. The QEnergySpa and BEFE were invented by Mr. Terry Skrinjar.  Also, engineered by Ivan Krell Serensen.

 

Bio-Electric Field Enhancement is Energetic MedicineRe-enforces Your BioElectric Field

Electric medicine was commonly used last century and early this century until the pharmaceutical industry began supporting medical schools, then the teaching of electric medicine was eliminated.

Bio-Electric Field Enhancement Power Unit

Some healing systems use a square wave dc pulse to affect the body, but water contains a bio-charge pattern where the frequencies are constantly changing and have patterns within patterns. Our bodies are electrical and seventy percent water or more, so, logically, the Bio-Electric Field Enhancement Unit could not only recharge our bodies, and therefore enhance healing and reduce stress, but achieve a rate of success that has not been achieved using any other principles. It is a therapeutic aid to pain management and healing and much more.

Very few medical devices are as visual as the Bio-Electric Field Enhancement unit.

BEFE Model 3006It is placed in a normal bathtub after the person to receive the therapy is already in the water. The unit delivers a bio-charge to the body’s own frequency, which recharges the body’s electrical system, and gives you an energy boost. The treatment lasts from 25 –30 minutes. The water becomes interestingly discolored. Not that that has anything to do with the Detoxification in any way.

BEFE Benefits

The benefits of the unit are almost unlimited and include increased vitality and energy, pain relief, faster recovery time, improved concentration and sleeping patterns, increased perception and well-being improved liver, kidney, and endocrine function, as well as reduced inflammation and swelling. Other benefits include reduced arthritic and menstrual pain, assisting with incontinence, and gout conditions, organic toxin neutralization, and much more. The complex magnetic fields of the unit permeate and realign your own body’s energy field which allows the body to function better.

Cautions

The unit is designed for use by all ages as it has no side effects as the energies are the same and are therefore completely safe. It cannot be used by people who have battery-operated implants such as pacemakers, or implanted organs, during pregnancy or while on a course of life-sustaining prescription drugs. Organic medicines such as herbs are not considered drugs. Any prescription is best taken over an hour on either side of using the BEFE (QEnergySpa, BEFE). The units come ready to use and have Q-Techs (Q the Experience, Future Life Science) guaranteed after-sales service to ensure your unit works at peak performance at all times. All units are built to meet all international electrical medical safety standards and electrical safety standards for use in a bathroom.

Did you learn all that you need to know about Bio-Electric Field Enhancement BEFE?

Got more questions and/or concerns? Please feel free to contact me via email, as noted below, or call me at 319-208-1929. I look forward to sharing more. – Debbie Allen

_______________________________

Do you need spare parts for your QEnergySpa?

Q2Spa.com | Genuine QEnergySpa Parts | QEnergySpa Footbath | Orb Ring and Track Sets

Orbs and Cables | Array Cables | Fuses | QEnergySpa, BEFE Consumables | Support

Does your QEnergySpa have a broken or missing part also? Then you have found the right place.

First of all, we have all parts to fit ALL BEFE and QEnergySpa models. In addition, the most asked-for parts include replacement rings and tracks, cables, orb parts, orb shells, and orb buttons. We also offer all services including warranty and repair. Q2Spa.com also offers Certified Used Models to meet almost every budget. You may see all the Q2Spa.com used models, Go here.

Lastly, what is new at Q2Spa.com? Check out our Blog, look here.

Q2Spa| Genuine QEnergySpa Parts | Foot Bath Tips | Veggie Trials | BEFE Parts

The statements on this site have not been evaluated by the FDA.
These products are not intended to treat, diagnose, cure, or prevent any disease.