Bio-Energy Key Concepts
It’s NOT about money. The true value lies in people, health, and wellness.
Learn about the Key Concepts and why the original QEnergySpa is still the best, helping people worldwide since 1995.
The Information below may help you to understand the technology and may help you decipher fact from fiction.
Concepts related to the QEnergySpa vs. the Footbath Detox Industry
– The QEnergySpa – Bio-Energy Therapy
– The Ionic Footbaths – Positive and Negative Ions
- Ionization
- Bio-Energy Resonance
- Polarity
- Water Color “Charting”
- Cost and Value of Construction
- Power Supply FAQ
- Safety Features of the Q ENERGY Spa
- Control Amps? Actual: We “adapt the water” with salt.
- Common Maintenance
List of Questions to Ask When Buying a Footbath
Different technologies…
There are really only two categories of designs for these so-called footspa detox devices.
These two devices are worlds apart.
1. Q Energy Spa Design: Bio-energy therapy through the water with OVER 20 years of success behind it
2. Ionization: Foot detox which began around the year 2002.
BioEnergy Therapy
The QEnergySpa device is a bio-energy therapy technology, which basically and in short, enhances and elevates the bio-energy level in water by means of a complex resonance field interaction with water. Submerging any body part into this now higher energy level water allows the body to absorb as much energy as the body’s cellular integrity can hold at that point in time, like a domino effect from cell to cell throughout the entire body, starting at the outer dermal layer in direct contact with the water. The cellular bio-energy absorption methodology, ie: from cell to cell throughout the body comes from physics. The law of equilibrium (Balance). It is not physically possible to have a high energy cell right next to a low energy cell.
They WILL balance and since the bio-energy in the water is as natural as can be, it is the same bio-energy already present throughout the body so it is not even possible to have any prolonged negative side effects. You may experience a short-term as we refer to it, healing crisis. But it should be quite impossible to cause harm.
The bio-energy therapeutic quality from the use of the QEnergySpa is derived from the interaction of the complex resonant field created within the water by the water module, the ORB. All ionic or electrolysis processes ONLY results in discoloration and precipitation within the water and are irrelevant.
The Ionic footbath devices are in essence a simple electrolysis device, which effectively passes a current through the water creating negative ions in the water which are supposed to drag out the toxins from the body. There is no particular resonance in the water, just a direct current.
In other words, this can easily be achieved using two forks attached to a car battery. Even the carbon in pencils will do as demonstrated in this example. You just have to add a lot of salt to get it going otherwise there is not sufficient conductivity in the water. However, is it ionization or something entirely different? Every design from two nails, two forks, two pencils to coiled fence wire with electricity applied, will affect water in one way or another. Every one of these devices will produce a different outcome.
Ionization…
The more negative ions generated, the better for your health. If so, one should also recognize that everyone is different, so too exposure to ions could potentially have different outcomes depending upon the person and how the ions were generated/created. Take Ozone for example. Too much ozone and you can burn your lungs. In fact, some information indicates that if you can smell the ozone, it is already of a concentration too high for your lungs to handle.
Research Caution: Most if not all research on ionization over the past 60 years or so are related to air, not water.
So let’s talk about ionization in water instead of AIR. Chemically, ionized water is meaningless. Pure water cannot become alkaline, nor acidic. In fact, pure water does not conduct electricity whatsoever, so you cannot use electrolysis at all. Water must contain metallic ions such as magnesium, sodium, or calcium, hence the reason that these ionization devices requiring a considerable amount of salts added, and this will also potentially explain where the ions are coming from.
Does ionization of water (or the elements within the water) alter the pH (Acidity) of the water? If so, more is not necessarily better because a strongly alkaline solution can burn as much as a strong acid.
One of the more important issues in ionization and for that matter many other technologies is not so much the amount of power used, the level of ionization achieved, but how it was generated to achieve what result. You could say generated by excitation. But how? You can use direct current, alternating current and pulsed current, you can use magnetic fields and you can actually also do it biologically and chemically and probably many more different ways. Is any particular method of generating ions better than others for specific purposes such as health?
Einstein’s theory of relativity is all about an apparent relationship with the observer and in reference to travel it makes perfect sense, but in reference to electrical, biological, and chemical experiments, not so obvious anymore. Positive or negative; relative to what, who, and where. In the real world, there are no such things as opposites. Hot and Cold, relative to what? Everything is on a sliding scale. Any technology must be observed from within and not from an external perspective so how can we judge an ionic solution as either positive or negative. Altered granted, positive or negative, questionable. In respect to an external observer, both would be different levels on the same scale.
Quite a few ionization devices rely on this report: Negative Ion Report: The CBS Nightly News, Feb 14, 1995. Unfortunately, in most places where you will find this report, it has already been modified for use in Hydrotherapy, which is incorrect. This report actually deals with the ionization of air and the report was written by Spartan Enterprises Inc. (Oil and Mining Industry since 1982)
If ionization in the water itself is not possible because the reverse reaction is actually faster and hence cancel each other out unless you siphon out near the electrodes and even then that is not from pure water anymore otherwise the reaction would not even take place. As soon the Hydrogen/Oxygen ions are created they re-combine. This makes talking about water ionization devices pointless as the electrodes in these devices are intertwined. If they were not though, it may be even worse because you would then have one foot in negative ions and the other, in positive ions canceling each other between your feet. Again a net neutral, if it was possible. Furthermore, all town water supplies are always different even from day to day, season to season, containing everything from mineral salts to fertilizers, pesticides, hormones, excrement, and medications that means that the ions that we are talking about are ions generated by electrical means, based on all these interesting chemicals. Stating it like that actually sounds very dangerous.
Bio-Energy Resonance… (This is the important bit)
In stark contrast, the QEnergySpa uses resonance to resonate directly with the water, enhancing the energy quality within the water itself. We are talking about the very base energy level of water and life. What this means is that it not resonating with any of the chemical content or any other unknown substances in the water, because it is not resonating within the same frequency or range. Keep in mind that we are talking about a complex resonance interaction, not a singular frequency resonance.
Two identical tuning forks, one active and one passive, tuned to the same resonant frequency are symbiotically linked. Tap the active tuning fork and the passive tuning fork will begin to resonate on its own accord. If the resonant frequency of either tuning fork is minutely different, the active tuning fork will have no effect on the passive tuning fork. Note too that any passive tuning forks in the range of any of the harmonics of the active tuning fork will also be directly affected.
Compare the turning fork example to the QEnergySpa Water module (Orb/Array). This water module has 6 active rings (tuning forks) and one passive (balancing) ring. The passive center ring will create its own resonance through the symbiotic link with the harmonic resonances of the 6 active rings and that field created will help to balance the upper and lower hemispheres. The 6 active rings will each on their own create a resonance and will each also be affected by each other and the harmonics of the others and hence in all, create a global complex interactive resonance field. It is this complex interactive reaction with water itself that will enhance the energy quality of the water.
There is a little more on this link here: How the QEnergySpa works
And here a small example of how a single frequency in the audible range affects water. You can clearly see how, when the frequency gets close to a harmonic resonance of the water, how the water reacts.
https://www.facebook.com/QEnergySpa/videos/453942664736552/
Positive vs. Negative Ions and Polarity
First of all, the Bio-Energy Therapy, QEnergySpa technology is and has never been about ions, positive or negative. This is one of the reasons based on the ionization above that the QEnergySpa does not need as much salt, if any in order to work, because it is not based on ionization but rather resonance interaction.
- Ionic technology devices claim that it is possible and desirable to adjust the amount of positive or negative ions in the water.
- Negative Ions are supposedly good ions. Positive ions are depleting, so you would want negative ions NOT positive ions.
- But why would you want positive ions? This would be ludicrous to even suggest. But it is there.
This is a link to a report on ions used by the Ionic devices: Role of Ions in Body Chemistry
- The report is actually a little misleading for use, even in the Ionic Detox industry
- The report is by Spartan Enterprises Inc. a Mining & Oil-based company started in 1982, written in 1995
- The report is more directed towards magnetic resonance.
- Robert Becker is well known for frequency devices, their effects, but more on direct frequency applications, not really ions.
- The report is based on ions in AIR, NOT water. With a simple note on hydrotherapy inserted. Whoever did that.
- However, the Report does show that negative ions are healthy
- Also, that positive ions may be potentially deadly if applied using magnetic resonance.
- Therefore this report should NOT be used to establish validity on any Ionic Detox device.
As long as both the positive and negative electrodes are in the same body of water. Consider this the same as water running through your garden hose. The water you push into one end is the same water that comes out the other end, at least the same quantity. Electrically, what goes in must come out. Hence electronically it is always a net neutral. So positive or negative really don’t make sense no matter what polarity. But in the electrical path through the water, the electrons may be able to excite and resonate things.
Understanding the science behind the technology, you will also understand that changing polarity between electrodes of different compositions will alter the energy signature in the water. (Resonance if you will). It is still going to be the net same potential and current and hence nothing really changes here. Except; For the sake of the argument, let’s for the moment say that electrons, proton & neutrons don’t exist. (I know, this is a stretch) That will also mean that ions of any kind don’t exist. So by changing the electrodes in this example, all you will be doing is altering the signature (resonance) and the final outcome will be different, no doubt. But to what extent and for what purpose, you will need to understand the entire genetic and biological make-up of all life on earth in order to know what the different signatures (resonances) created will do to that life. So what do we do, we experiment and when we come across something that looks good, we estimate based upon the experiment that it will be good for us and we hope that it will have no long-term negative effect. Look at microcurrent technologies, been around for 60 plus years. But let’s not look at current medical history.
To make my point here; I am sure that we could create plenty of negative ions at the frequency range of a microwave oven, do you think that it will still be good for you? It is negative ions? Should be great for my health. But in this case, I think I would be cooked. Again it is all about how it was created, not just what and how much!
You do not need a sledgehammer to push a swing, a gentle nudge to keep in going is all that is needed. So it is, for all science and technologies, a gentle tickle to achieve great results. If you use the sledgehammer approach, you will always create extra heat and you will always have other problems that have to be overcome. Mind you with some of our existing technologies the sledgehammer approach is still the only way until we learn.
With that in mind, we (our scientific community) have stumbled across negative ions (from our perspective) and it has had a very good health outcome for a very long time and as long as we do not deviate too far from the way in which we create negative ions for health benefits we will prevail. You also have to remember that the recovery process of the human body is amazing. Quite a few devices invented actually damages the body in the application process, the body then repairs the damage along with the reason for the application, at least that is the hope.
For use in water, let’s forget all about ions of any kind and focus on ORP, Oxidation Reduction Potential. We have positive and negative ORP here as well. It has also been shown that negative ORP is great for your health and a positive ORP, not so much. For example, a glass of orange juice bought from the store may have a positive ORP of about 200, squeeze the orange yourself (ie fresh) and it will be a negative ORP of about 200 to 300.
The QEnergySpa has been tested with an ORP reading as low as negative 1200. No other device can do this.
Ionic technologies also place great emphasis on the discolorations in the water and what they imply relative to the person in the water.
Polarity
Polarity is a marketing gimmick and provides no benefit.
This is why: In this technology, the claim is made that it is possible and desirable to adjust the amount of positive or negative ions in the water. Simply put, this is an electro-chemical impossibility. As long as both positive and negative electrodes are in the same body of water it is basic electrochemistry that there is always a net neutral. That is that for every positive ion created, there is a negative. In “their” technology, when they claim to alter the amount of positive or negative ions, they are simply changing the polarity on which electrode is positive or negative at a given moment. In this particular product, there is a great emphasis on the discolorations in the water and what they imply relative to the person in the water.
Negative Ions are good ions. Positive ions are depleting. You want negative ions NOT positive ions. The units on the market that claim their machine can create more negative ions or positive ions depending on which mode the unit is set to is not only inaccurate but why would you want positive ions?
Water Color “Charting”
Water Colors & Smells:
The bio-energy therapeutic quality from the use of the QEnergySpa is derived from the interaction of the complex resonant field created within the water by the water module, the ORB. All ionic or electrolysis processes ONLY results in discoloration and precipitation within the water and are irrelevant.
The Ionic footbath devices are in essence a simple electrolysis device, which effectively passes a current through the water creating negative ions in the water which are supposed to drag out the toxins from the body. There is no particular resonance in the water, just a direct current. In other words, this can easily be achieved using two forks attached to a car battery. Even the carbon in pencils will do as demonstrated in this example. You just have to add a lot of salt to get it going otherwise there is not sufficient conductivity in the water. However, is it ionization or something entirely different? Every design from two nails, two forks, two pencils to coiled fence wire with electricity applied, will affect water in one way or another. Every one of these devices will produce a different outcome.
All ionic or electrolysis processes ONLY result in discoloration and precipitation within the water and although interesting and a point of discussion, it is irrelevant to the process and effect. There are far too many parameters that affect the colors and smells of the water after use of the QEnergySpa (or any other similar kind of technology) and although every person’s outcome in the water is different (you affect the outcome, but it does not come from you), please remember that you cannot and should NEVER diagnose or rely on the watercolors and or smells in any way.
There is no scientific data supporting any analysis of watercolors in the foot tub during or after a session with any technology. The coloration and precipitation of the water after every session is primarily due to a combination of the degradation of the rings within the water module (Orb) and the impurities present in the water source. However, if these were the only two factors affecting coloration and these factors remained constant, one would expect the same coloration outcomes after every session. However, this is not the case. There are far too many other parameters/factors that also play a role.
The main factors that affect water coloration are:
- Water Source
- Conductive Agent
- The person in the session
- The temperature of the water
- Altitude on Location
- Weather and other Environmental Factors
- Lunar cycle.
- The Water Module (Orb or array)
- Power Supply
- Container used
Physically and medically speaking, it is not possible in 20 to 30 minutes to turn the water black with parasites and toxins from your bloodstream through your sweat glands/pores in your feet, despite the indications that the pores on the feet appear to be a little large than elsewhere. Secondly, to put this argument into perspective, you would have to sweat day and night through your feet alone for close to 2 years in order to detox as much as you would through one urination.
Thirdly. This entire dirty water theory was used by bottled water companies some 20 years ago passing lots of currents (amps) through two probes in a glass of water turning it black in a few minutes to attempt to prove that the competition’s waters were dirty and theirs were clean. It is wrong!
Cost and Value of Construction
Most vendors produce their unit in Asia, built in a factory on a conveyor belt.
Not the Q Energy Spa. Each machine is STILL built by hand in Australia. Conventional electronics do not recognize or for that matter understand the principles of field science and so do not see it as a consequence of operating the effectiveness of electronic equipment.
The construction of the Q2 is extremely precise in the materials that are needed to be used to build it, as well as the dimensions, ratios, and methodology of construction. The reason for this exactness in every detail and of ratios calculated is crucial to the outcomes or effectiveness of the field produced and the quality of life force enhancement imparted to the water. Any change in any aspect of the construction, or materials used, will degrade or change the field. This is the workings of field science, all fields acting in harmony to produce the desired end result.
Power Supply FAQ
We (Q Energy Spa) have built both performance and safety into our power supply. Our design has used state-of-the-art technology since 1996. An integral part of the power supply manufacture is the choice of connectors and cable that connect the Orb/Array to the power supply, as an example the use of audio connection pins compared to proper electrical connectors. While both carry or transfer electrical energy each is constructed from differing materials and with different processes. Audio connectors can again overlay particular noise or interference to the signal supplied to the Orb/Array.
One further overriding factor to the power supply manufacture comes down to the materials used to make the outer casing. The very first commercially available power supplies for the original BEFE unit were rudimentary in construction and manufactured with metal casings.
While these units produced favorable results it became apparent that the construction and materials used were not producing the best result possible and so many man-hours were put into finding better materials and a better designer of the power supply, In the words of the electrical engineer and one of the Directors at QTech. “All I was taught in my years at University did not prepare me for the education process I undertook in the construction of this power supply.” Close enough is NOT good enough!
Safety Features of the Q ENERGY Spa
The QEnergySpa is built to meet the very stringent International Electrical Safety Standards, IEC 60601.1, and is compliant with the domestic CE mark. The units are powered by AC and when plugged into your wall it delivers a very specific DC (Direct Current) between 0.3 Amps to 3 Amps at about 28 volts DC, with a maximum of 30 volts DC, and can actually handle up to 100Watts. Safe construction levels of safety are as follows; an external fuse that shuts down the machine if the fuse blows and an internal fuse that offers overall protection for the entire unit.
The Power Supply is IP67 rated. This means it is splash-proof and dust-proof. You can actually drop it into the bath with you safely, not that we would ever recommend that anyone does that. The QEnergySpa is hand made. Full inspections are carried out at every stage of manufacture. The QEnergySpa is fully tested for safety and correct operation prior to leaving the factory.
How To Control Amps: Current vs. Salt
- Adjustable current control is imperative due to a variety of external variables:
- Differences in human skin resistance
- Differences in the water used
- Differences in the electrolysis
There are several factors that raise or lower the conductivity: salt, human body skin resistance, and water quality. If you raise the current with salt the conductivity increases.
The Model q6000 adjusts the conductivity automatically.
Model(s): q36 and q26S have a toggle switch to adjust conductivity manually.
Our QEnergySpa models allow you to have full control over adjusting the conductivity. All other “copy-cat” footbath units cannot deliver the power we can. They are simply NOT the same quality. DON’T be fooled!
Additional Tech Specs:
Amps
Output: 3 amps
Our Q Energy Spa models are the original technology and continue to be the most powerful models on the planet.
CLASS II Equipment, Type B Applied Part
Safety Extra Low Voltage Isolating DC Power Supply
Input:
100 to 120VAC 50/60Hz, 95W or
200 to 240VAC 50/60Hz, 95W
as indicated on the power supply
Output:
Isolated, Rectified and Filtered, 28VDC, 3Amps
Dimensions: 190x135x103mm
Weight: 2.85 Kg (6.2 lbs) (Power supply only)
Hertz
Everything has an electrical frequency (the number of oscillations per second) measured in hertz. (MHz) Megahertz is a unit of frequency, equal to one million cycles per second. All atoms in the universe have vibrational motion.
Our Q Energy Spa models run at 60 Hertz.
Ion Voltage
The Q ENERGYspa is built to meet the very stringent International Electrical Safety Standards, IEC 60601.1, and is compliant with the domestic CE mark. The unit is powered by AC and when plugged into your wall it delivers a very specific DC (Direct Current) between 0.3 Amps to 3 Amps at about 27 volts DC, with a maximum of 30 volts DC.
Common Maintenance
Our models use disposable rings for the orb or array. We see a wide range of averages depending on the water bath “variables”: human skin contact, water quality, and age of rings/track sets. Each set may last anywhere between 8-100 sessions depending on your BEFE/Q2Spa model and your water.
Copper or Plastic Tub?
The energetic properties or signature of the bath container also impacts the coloration and precipitation of the water. We recommend you use (in order of preference) a raw untreated copper bowl, glass, ceramic, or plastic bowl (for ease and cleanliness of use, a disposable plastic bag or liner may be used). You can also use your bathtub. The only stipulation is that the bowl cannot be made of or contain Aluminum or uncoated fiberglass. Size and shape matter little, as long as the orb is fully submerged and you can fit a part of your body in the water.
In order of preference.
- Copper Tub: Not varnished and not treated in any way. Not even cleaned. No welding or other glues. The copper tub effectively folds the complex resonating emanating field back upon itself and hence increases the field strength in the water. The copper tub has the potential to increase the effectiveness from 10% to 30% all depending on many factors.
- Clear Glass bowl
- Clear Plastic bowl
- Colored plastic bowl, stay away from darker colors.
See more details: Copper Tub
Potassium Citrate vs. Salt
1. Potassium Citrate (Food Grade)
This is our preferred choice to increase water conductivity. When used with Rain/Tank water, it has been shown to extend the lifespan of the water module consumables.
See more details: Order here
2. Rock Salt or Sea Salt
More is NOT necessarily better. Provided sufficient current flowing in the water is established, the water module is doing its job. More power does not make it any better, it only wears it faster. The more conductivity agent added the more current will flow, the more wear on the Water Module.
NOTE: NEVER use more than 1/8th teaspoon per foot bath session.
Epsom salts may have numerous health benefits, but not for use in the water for a QEnergySpa session. So too for any and all other additives.. NEVER add anything other than Potassium citrate or salt as listed above. You may use standard table salt for one or two sessions, but no more. This comes down to the predominant signature in the water and your body’s healing ability.
Shopping for Footbath?
Questions to Ask When Buying a Footbath
What is the amperage? (details)
Answer: 3 amps
How high are the watts? (details)
Answer: ~95 watts
Are you able to manually adjust the conductivity? (details)
Answer: Potassium Citrate or sea salt
Why do I need to know about positive vs. negative ions and polarity? (details)
Answer: You want negative ions NOT positive ions. Positive ions are depleting.
What are the safety features of the Q ENERGY Spa? (details)
What kind of tub should I use? (details)
Answer: Quartz Crystal Bowl or Copper Tub.
Do you have to manually replace the rings and track? (details)
Answer: Yes
How many sessions per ring (2) and track set? (details)
Answer: Each set may last anywhere between 8-100 sessions depending on your BEFE/Q2Spa model and your water.
How do we clean and disinfect the orb/array get cleaned? (details)
__________________________________
Nothing works better and performs like the Original QEnergySpa. For that reason, insist on it ONLY.
See all of our QEnergySpa products. Go here.
Do you need spare parts for your QEnergySpa?
Q2Spa.com Online Since 2002 | Genuine QEnergySpa Parts
Original QEnergySpa | QEnergySpa, BEFE Consumables | Support
Also stocking solid, untreated, unvarnished copper tubs – which has the potential 10% to 30% increase in
efficiency, Potassium-Citrate, which may raise the conductivity level of your water and more.
Q2Spa.com also offers Certified Used Models to meet almost every budget. You may see all the Q2Spa.com used models, Go here.
Q2Spa| Genuine QEnergySpa Parts | Foot Bath | Q The Experience | BEFE | Q2 | Q2Spa
The statements on this site have not been evaluated by the FDA.
These products are not intended to treat, diagnose, cure, or prevent any disease.