facebook button order button
Your QEnergy Spa North American Sales and Service Center
- Many Imitate. NONE Duplicate -

Contact Us

Q Energy Spa Models

Shopping For a Foot Bath?

Referral Program


Q Spa Models
        - Accessories
        - Order Parts
        - Used Models
        - Why Is It Safe?




Schedule Sessions
Local Sessions

How it works
  - Bio Energy Concepts
  - Cleaning
  - Charged Water
  - Conductivity
  - Contraindications
  - Detoxification
  - Dilution Factor
  - Download Tools

  - ORB Assembly
  - Array Assembly
  - Cleaning Orb/Array
  - Resonance
  - Science
  - Water Colors
  - When To Replace
  - Q Benefits

  - AutismOne
  - Comparative Analysis
  - Detox Scam?
  - Science
  - Q History
  - Quantum Science
  - Stress, Anxiety & Hostility
  - Veggie Trials

  - Q Spa FAQ's
  - More...FAQ's

Retired Models
  - BEFE
  - BEFE Array
  - Array 2000
  - Model 2500
  - Model 3006
  - Model 3024
  - Model 3100
  - Model 4105
  - Model q46

Intl. Voltage Chart
Repair/Terms of Service
Trade-In Special

Other Health

We are not allowed to say that the Q ENERGYspa has treated and or cured anything. We are plain simply not allowed to, to comply with the FDA.
Healthy Options

Nutrition Therapy
Cleanse & Purify
Essential Oils
Ningxia Red
Therapeutic Oils
Thieves Oil Blend

            Superseded Array 2000

The Array 2000 (water module) was Q Tech Laboratories' second mainstream Array, it was shipped with the B.E.F.E. power supply model numbers: 3006, 3024B, 3024D and 2100's. Below is the step-by-step illustration on how to change the Rings and Track.


Array 2000




Step 1


Remove the stainless steel track by unclipping it from the bottom positive ring. Swinging it outwards at an angle and slide it downwards to remove it from the top acrylic plate.

Step 2


Gently slide the removable leg out (it is safer and easier to do this if the Array is on a table or flat surface). The 2 positive rings (the degraded pair) may or may not come out with the leg when you remove it. If not, gently slide them out horizontally.

Step 3


Slot the new plates into the existing slots followed by gently sliding the leg back into place. Be sure to align the plates correctly with the appropriate slots in the other legs. If it does not go back together easily, DO NOT force it! Double check to make sure that the plates are seated correctly and there are no obstructions.

Step 4


Finally, slot the top of the track into the slot in the top of the Array. As you slide it into place, the section marked “A” should be on top of the top newly inserted plate and “B” should be underneath the bottom newly inserted plate. The track should audibly click’ into place.

Clipping onto the Array


The end of the cable that attaches to the array has two connectors or clips. The negative one is black in colour and round in shape. This fits onto the round rod located in the centre protruding from the top of the array. The other is red and square. This fits onto the flat metal track on the outside of the top of the Array.

Completed Array


Disclaimer: Please note that the Q ENERGYspa® is not offered, nor intended to diagnose, cure, mitigate, prevent or treat any disease or health condition and is not a medical device. Use only as directed and consult your primary health care provider if you have any medical concerns and/or if symptoms persists. Water color from any session, with any device of this technology, may vary due to a large number of different parameters and circumstances.

NO interpretation should EVER be applied to any one color and/or precipitation, NO matter the configuration or system used. To do so, would show a serious lack of judgement and unerstanding of the technology.

order here!
Company | Warranty Details | Referrral Program
How does the Q2 System work?

Favorite Sites:
Denver Nutrition | Young Living Oils
WebDeb Logo
WebDeb® Inc.
Copyright © 1997-2019

Design & Hosting by WebDeb, Inc.