facebook button order button
Logo-q2spa
Your QEnergy Spa North American Sales and Service Center
- Many Imitate. NONE Duplicate -

HOME
Contact Us

Q Energy Spa Models

Shopping For a Foot Bath?

shop-here



Schedule Sessions
Local Sessions



q47


q47


q47


  - Accessories
  - Order Parts
  - Used Models
  - Why Is It Safe?

Schedule Sessions
Local Sessions

Repairs/Service
Intl. Voltage Chart
Repair
Repair/Terms of Service
Trade-In Special Warranty

How it works
  - Bio Energy Concepts
  - Cleaning
  - Charged Water
  - Conductivity
  - Contraindications
  - Detoxification
  - Dilution Factor
  - Download Tools

Troubleshooting
  - ORB Assembly
  - Array Assembly
  - Resonance
  - Science
  - Water Colors
  - When To Replace
  - Q Benefits

Research
  - AutismOne 2017
  - Comparative Analysis
  - Detox Scam?
  - Science
  - Q History
  - Quantum Science
  - Veggie Trials

  - Q Spa FAQ's
  - More...FAQ's

Retired Models
  - BEFE
  - BEFE Array
  - Array 2000
  - Model 2500
  - Model 3006
  - Model 3024
  - Model 3100
  - Model 4105
  - Model q46

Other Health
Benefits

We are not allowed to say that the Q ENERGYspa has treated and or cured anything. We are plain simply not allowed to, to comply with the FDA.
More
Healthy Options

Nutrition Therapy
Cleanse & Purify
Essential Oils
Ningxia Red
Therapeutic Oils
Thieves Oil Blend
HQ5 Zapper




The Q ENERGYspa Dilution Factor

The Bio-Energy Touch

This section contains theoretical information on the method used to optimise results with the Q ENERGYspa® depending on the dilution factor. None of the information shown should be held as fact.

All percentages used herein are based on a water temperature of 27.1°C (approx 70° F).

Please note that although this document describes optimal levels, for practical purposes we recommend using as much or as little water as you feel comfortable with, at the temperature that you prefer.


ORB

The dilution factor is determined by aspects such as: percentage of body mass immersed  in the water compared to the amount of water used. Therefore, the lower the ratio between immersed body mass and volume of water in the bath, the higher overall body energy absorption you will obtain from the Q ENERGYspa®.


Bio Energy Dilution Effect

Any part of the body which is not submersed into the water, will be energised through the body part which is submersed. Therefore, the furthest point on the body away from the water, is energised to a lesser and delayed extent. This dilution factor is gradual across the entire body.

Where the dilution factor may become significant, would be in such instances where you wish to assist in recovery of an injury, whether new or old. In this instance, it is recommended that you immerse that particular body part into the water for maximum benefit. Caution: avoid immersing an open wound due to risk of infection.

Dilution-chart

Figure 1, Bio-Energy Dilution Factor per body weight

Figure 1 - The diagram above indicates how the dilution factor decreases with more body weight immersed into the water with the Q ENERGYspa®. Immersing your whole body gives you no dilution or a ratio factor of 1:1. Whereas, inserting ½ of your body equates to a ratio of 1:2 or ½ dilution at your opposite extremities.

However, should you only insert your hands, then the dilution would become 1:83 at your opposite extremities.

In short, in order to increase efficiency and the charge rate, we recommend that you maximise the percentage of your body mass in the water.

Volume of Water Required

The efficiency of the Q ENERGYspa® is also dependent on the amount water in relation to the amount of body weight you immerse. The ideal water volume to body weight is a ratio of 3.5 litres of water per kilogram of body weight.

Table 1, below and the corresponding chart in Figure 2, indicate how much water is recommended for full body immersion in relation to your weight, based upon the 'ideal' ratio listed above. Figure 3 however, indicates the desirable water volume for partial body immersion (e.g. you feet or hands) or smaller body masses (e.g. infants and pets).

Optimal Volume of water required

Volume-water

Figure 2, Volume of water per body weight.

Volume of water per full body weight

Figure 3, Volume of water per partial body weight.

Weight
(Kg)

Volume of Water
3.5 l/Kg (Litres)

0.5 1.75

Water

 

The Source of

All Life

 

Conserve our
precious
resource



Q The Experience
1 3.5
2 7.0
3 10.5
4 14.0
5 17.5
6 21.0
7 24.5
8 28.0
9 31.5
10 35
30 105
50 175
60 210
70 245
80 280
90 315
100 350
120 420
140 490
160 560
180 630
200 700

Table 1, Volume of water per body weight.


Calculate your ideal water volume in relation to
your immersed body mass.

 

Below is a table to help you estimate your dilution factor. Please edit to suit your requirements.

Hand =

estimated % of total body weight.

Hands and Forearms =

estimated % of total body weight.

Feet and ankles =

estimated % of total body weight.

Body Weight

Body Weight Submersed

Estimated weight of Body Part

Dilution Factor

Litres of Water Required

Enter your

Total Body Weight

Kg

Full body immersed

kg

Litres

50% of body immersed

kg

Litres

Both feet and ankles

g

Litres

Hand & forearm

g

Litres

Both hands immersed

g

Litres

Hand immersed

g

Litres



What happens if the water volume per body weight exceeds the recommendations above?

Simply, the effectiveness would diminish, increasing the dilution factor.
For example, if you were to immerse one foot in 7 litres of water and your foot weighed, say 2kg and your total body weight was 60kg, the dilution factor would be 1:30. That means that the Bio-Energy efficiency would be one 30th less at the opposite extremities of your body compared to the body part immersed. Therefore, if you weighed 120kg the dilution factor would be 60. If however, you were to immerse both your feet into the water, weighing say, 4kg and you were using 7 litres of water, your weight being 60kg, you would only have a dilution factor of 1:15 at the furthest point away from the immersed body part.

Bio Energy Dilution due to distance from the ORB itself

Q Tech Laboratories research indicates that the Q ENERGYspa® can energise water volumes up to 10,000 litres. Hence the effective radius of the ORB is approximately 1.2m. Outside this distance the water will still be energised through the domino effect from water molecule to water molecule, however, the effect will be diluted. Hence we recommend that you place the ORB near the middle of the tub and not near either end of the tub.

Patented Q ENERGYspa®, Professional model


Disclaimer: Please note that the Q ENERGYspa® is not offered, nor intended to diagnose, cure, mitigate, prevent or treat any disease or health condition and is not a medical device. Use only as directed and consult your primary health care provider if you have any medical concerns and/or if symptoms persists.

 



Disclaimer: Please note that the Q ENERGYspa® is not offered, nor intended to diagnose, cure, mitigate, prevent or treat any disease or health condition and is not a medical device. Use only as directed and consult your primary health care provider if you have any medical concerns and/or if symptoms persists. Water color from any session, with any device of this technology, may vary due to a large number of different parameters and circumstances.

NO interpretation should EVER be applied to any one color and/or precipitation, NO matter the configuration or system used. To do so, would show a serious lack of judgement and unerstanding of the technology.


order here!
CLICK HERE
Company | Secure Orders | Warranty Details
How does the Q2 System work?

Favorite Sites:
1 | 2 | 3 | 4
WebDeb Logo
WebDeb® Inc.
Copyright © 1997-2017

Design & Hosting by WebDeb, Inc.